Light Kits - Mongoose 50/90

KYMCO may not have put a front light on their small quads, but it is available. The bike already has the necessary wiring and switchgear, so installing this kit is a simple swap. Once installed, the front of the bike will look identical to the bigger Mongoose 250.

 $85.99 + Tax and/or Shipping

Here are the basic steps to install the kit:

1. Unscrew and remove the black plastic cover
2. Find the unused wire connector under the right front fender and unplug the cap (see picture below)
3. Screw in the headlight
4. Connect the headlight receptacle (female end) to the newly unplugged receptacle on the bike (male end) *Note: The light will only come on when the bike is running