|
Pill Box
- Nice replica of older British and European switchgear.
- Has a 3 position toggle switch and two momentary buttons.
- The most common configuration for this switch is to use it as a turn signal, horn, high beam or kill switch.
- Fits 7/8" bars
|
$21.99
|
|
Pill Box w/wires
- Same switch as above
- 18" of wire leads already attached
- 6 wire configuration
- Fits 7/8" bars
|
$18.99
|
|
Chrome Toggle - Two position "on/off" switch
- Push button "momentary" switch
- Wrapped in a vintage looking chrome housing
- Fits 7/8" bars
- No wires
- New LOWER Price!
|
$10.99
|
|
Chrome "Dip" Switch
- Two position "on/off" switch
- Used as a Headlight Hi/Low Switch on older Italian and British Machines
- Fits 7/8" bars
- No wires
|
$12.99
|
|
Turn Signal Switch
- 3 position (on-off-on)
- Perfect for turn singals
- Fits 7/8 in bars
- Includes 3 wires (12" length)
- NEW LOWER PRICE!!
|
$12.99
|
|
Horn / Kill Switch
- Single momentary push button
- Fits 7/8" bars
- Made in Germany
- No longer available - See "Funky Red Button" near bottom of page
|
No lOnger
Available
|
|
OEM Style Left Hand Switch - Has all the features of most LH switches
- (Turn Signals, Horn, Hi-Beam, Low Beam, and Hi Beam flasher)
- Has the capability to turn your headlight off
- Manf by: K&S Tech
|
$69.99
|
|
D.O.T Approved Left Hand Switch
- Similar to the above switch with the following exceptions
- Cannot turn headlights off (low and high only)
- No high beam flash switch
- Manf by: K&S Tech
|
$71.99
|
|
Chrome Left Hand Switch - D.O.T Approved
- Similar to the switch above without the ability to turn off your headlights
- Wrapped in a chrome package
- Manf by: K&S Tech
|
$77.99
|
|
Left Hand (All in One) Switch
- This is an off-road LH switch
- Includes Headlight Off-Low-High, Turn
Signals, Horn Button and High Beam Led Indicator
- The best
part is.....it's only 29mm
wide (thats only 1 1/8")!!
- Fits 7/8 in handlebars, includes a
wiring diagram
- 8 bullet terminals
- Rated for 6 amps at
10-14 volts
- The turn signal switch is a three position rocker with off
in the middle (it is not a DOT approved "push to cancel" type
switch).
- Manf by: K&S Tech
|
$52.99
|
|
Headlight Switch
- Simple on-off rocker switch
- Was originally for Yamaha WR
250F(02-03), WR 426F(02) and WR 450F (03)
- can be used on just
about anything
- Includes bullet connectors and three prong headlight housing, for a direct "plug and play" application
- Housing is 20mm in width
- Fits 7/8" handlebars
|
$37.99
|
|
Another Headlight Switch - This one has a few more features
- 3
position switch (off-low-high) as well as momentary (kill) button
- All
this in a nice slim (20mm wide) package!
- Includes bullet
connectors and wiring instructions
- Fits 7/8" handlebars
|
$34.99
|
|
Honda Style Right Hand Switch - OEM Part # 35013-MY6-670
- Includes on/off kill switch
- Momentary starter button
- Measures 22mm wide
- Includes OEM style 7 wire harness (20" length)
- Includes bullet connectors for custom applications
- Fits 7/8" handlebars
- Rated at 6 amps
|
$29.99
|
|
Yamaha Style Right Hand Switch - OEM Part # 4C8-83975-00-00
- Includes on/off kill switch
- Momentary starter button
- Measures 30mm wide
- Includes OEM style 6 wire harness (20" length)
- Includes bullet connectors for custom applications
- Fits 7/8" handlebars
- Rated at 6 amps
|
$32.99
|
|
Starter Switch
- Simple starter button switch
- Momentary on/off could be used for many different applications
- Two wire switch with different connector types included
- Housing measures 27mm wide
- Wire length is 15"
- Fits 7/8" bars
|
$26.99
|
|
"Doo-Dad" Push Button:
- Single
throw double pole precision MOMENTARY switch
- Rated at 3 amps
- 6,
12 or 24 volts
- Fits 7/8" bars
|
$19.99
|
|
"Doo-Dad" Toggle
- There are two versions of this switch
- 1 - Two position (on-off) single
throw, double pole precision
toggle
switch rated for 6 amps at 6, 12, or 24 volts.
- 2 - Three position (on-off-on)
single throw, douple pole precision
toggle rated for 6 amps at 6, 12, or 24 volts.
- Comes in an
injection
molded polycarbonate
enclosure
- Fits all 7/8" handlebars
|
|
|
On - Off Switch
- There's no mistaking what you are
doing with this switch
- Can be used for just about anything
- includes male and female bullet connectors
- Measures 21 mm wide
- Fits 7/8" handlebars
|
$19.99
|
|
Billet Kill Switch
- This is a very nice kill (momentary) switch
- Anodized aluminum housing with rubber covered button (labeled "Stop")
- 2 wire switch
- fits 7/8" bars
- Available in Multiple Colors
- Manf by: FLY Racing
|
|
|
"Funky Red Button"
- Simple momentary switch
- Includes 12" of single wire - pre attached (not shown in picture)
- Fits 7/8" bars
- Depending on availability this switch may come with a red or black button
|
$12.99
|
|
On / Off Key Switch
- Simple, universal, 4 wire ignition switch
- Plug may work some ATV's and Scooters as is
- Technically not a "handlebar" switch
|
$19.99
|