 |
Reservoir Cap - Front Master Cylinder
- Billet Aluminum Reservoir Cap
- Will fit all GT 250's and GT 650's
- Also fits the ST 7 and TE 450S
- Genuine Hyosung Accessory
- "Hyosung" engraved on top
- Anodized - Available in Red, Gold or Black
|
|
 |
Reservoir Cap - Rear Master Cylinder
- Billet Aluminum Reservoir Cap
- Fits all GT 250's and GT 650's
- Fits the GV 650 and ST 7
- Genuine Hyosung Accessory
- "Hyosung" and logo engraved on top
- Anodized - Available in Red, Blue or Gold
|
 |
|
Frame Sliders - GT 250 (GT 250R)
- Genuine Hyosung Accessory
- Will fit ALL GT 250's
- You will need to cut a hole in your fairing on the R model
- Includes hole saw and template for accurate hole placement
- Easy to mount with included instructions
- A must have for any track days and nice piece of mind for everyone else
- Black Only
|
$179.99
|
 |
Fork Sliders
- Helps protect your forks and wheel in case of a crash
- Will fit all GT 250's and GT 650's
- Includes mounting instructions
- Available in Black with Red Anodized accents
|
$149.99
|
 |
Rear Luggage Carrier
- Two Versions: One for the "New" GT 250's and GT 650's with the redesigned tail section 2010 and newer
- One for the 2005 - 2009 with the "Old" tail section
- Mounts very easily with bolts already on your bike
- Will allow you to mount a hard box if needed
- Genuine Hyosung Accessory
|
|
 |
Hyosung Keychain
- Quality Brown Leather with Polished Emblem
- Genuine Hyosung Accessory
- Perfect gift for any Hyosung Owner
|
$7.99
|
 |
Arrow Full Stainless Steel System
- Larger Diameter Head Pipe for Improved Exhaust Flow and Increased HP
- Includes O2 Sensor Port for Fuel Injected Bikes
- Includes O2 Block Off Plug for Carbureted Bikes
- Must use Arrow Slip-On Muffler
- Made in Italy
|
$423.99
|
 |
Arrow Slip-On Performance Muffler
- Aluminum body with stainless end caps
- Includes removeable quiet insert
- Fits on Arrow exhaust system only
- Made in Italy
|
$324.99
|
 |
Arrow Bolt-On Performance Muffler
- Aluminum body with stainless end caps
- Includes removeable quiet insert
- Fits on stock exhaust system
- Made in Italy
|
$324.99
|
 |
NEW! 2010 and Newer - LED tail light WITH integrated turn signals
- Red Tail and Brake Light
- Orange Turn Signal LED's on the sides
- Direct plug and play
- Clear only for now
- Fits 2010 and later GT 250's and GT 650's
|
$114.99
|
 |
LED Tail and Brake Light w/ Integrated Turn Signals
- Features Red running light and brake light
- Integrated Orange Turn Signal Lights mean you can ditch your rear turn signals
- Signal resistors maintain the stock flash rate
- Direct plug and play for all 2004 - 2010 GT 250's
- Available with a Clear or Tinted/Smoke Lens
|
|
 |
LED Tail / Brake Light
- Direct Plug and Play for the GT 250 and GT 250R
- All 2009 and earlier models
- 16 Bright LED's with a lightly smoked lens
|
$93.99
|
 |
LP Oil Fill Plug
- Anodized Aluminum
- Pre Drilled for safety wire
- Available in Red, Black, Silver or Gold (click on thumbnail for more pictures)
- Includes new o-ring
|
|
 |
Oil Fill Plug
- Made by Yoshimura in their trademark Magnasonian finish
- Lightweight aluminum, pre drilled for safety wire
- We will throw in a new o-ring with each plug for free
|
$29.99
|
 |
Oil Fill Plug
- Red anodized aluminum
- Includes new o-ring
|
$23.99
|
 |
Headlight Kit
- Replaces the headlight bulbs on your 250R with super bright white, HID like units
- Rated at 4300 degrees Kelvin.
- Please check the back of your headlight housing for proper bulb styles
|
|
 |
Rear Hugger - Skidmarx
- Black gelcoat fiberglass
- Will fit all GT 250's
- Includes mounting hardware and instructions
|
$179.99
|
 |
Rear Hugger - Skidmarx
- Carbon Fiber, really lightweight and looks bitchin
- Fits all GT 250's
|
$279.99
|
 |
Solo Seat Cowl - Skidmarx
- Currently available in Black only
- Uses mounting hardware from your original seat
- Fits 2004 - 2010
- Includes instructions
|
$159.99
|
 |
Windscreen - Skidmarx
- This screen has a larger bubble than the Puig screen
- Currently available in Dark Smoke (more colors coming soon)
|
$99.99
|
 |
Headlight Cover - Skidmarx -
- Dark Tint
- Includes an easy on/ easy off mounting system.
|
$49.99
|
 |
Two Brother M2 Mufflers
- Available in polished aluminum, titanium or carbon
- Lightweight (3.5 lbs) and sound great
- Easy bolt on
|
|
 |
AIS Kit
- Designed to block of the Secondary Air Injection system on 2007 and newer GT 250's
- Eliminates backfiring on deceleration
- Includes instructions. (actual kit may differ from picture)
- Click HERE for more pictures
|
$29.99
|
 |
Spiegler Stainless Steel Brake Lines
- Increases your stopping power and looks good
- Front and rear lines available separately or as a complete package
- Specify GT 250 or GT 250R
- All of our kits include new aluminum banjo bolts
- Multiple colors available by special order
- Clear lines always in stock
|
|
 |
EBC Brake Pads
- The best thing you can do for your brakes
- Available in an organic pad or sintered metal (HH) for even more stopping power
- You will need two (2) sets for the front on a (250 R) and one (1) set for the front on a 250 Naked
- Will fit both fron and rear calipers
|
|
 |
EBC Rear Brake Rotor
- Direct bolt on replacement for the GT
- We recommend installing EBC pads with this rotor
- You will need to adjust your brake pedal to prevent your rotor from future damage
- Click HERE for the PDF instructions
|
$110.95
|
 |
Magnetic Oil Drain Plug
- An inexpensive piece of insurance for your motor
- The older models did not have a magnetic drain plug
- They updated them in 2009
- 14mm x 1.25
|
$10.99
|
 |
LED Turn Signals
- Available for the front or rear
- If mounting the fronts or the rears to stock bodywork you will need to enlarge the current mounting holes
- Available with a Black body and a Clear, Smoke, or Amber lens
|
|
 |
"Flasher" / Turn Signal Relay
- If you install LED turn signals front and rear you will need to replace your flasher relay (under the seat)
- Includes mounting instructions
|
$24.99
|
 |
PUIG "Double Bubble" Windscreens
- Available in Smoke, Dark Smoke, Black, "Carbon Look", Clear, Red, Yellow, or Blue
|
|
 |
GIVI 240A - windscreen
|
$159.99
|
 |
Woodcraft Clip-Ons
- These will work great on the Naked 250, however you may run into clearance issues with the fairing on the R model
- Anodized black, split mount design.
- Replacement bars available for $15.99 each
|
$154.99 /pair
|
 |
GT 250R Carbon Mirrors
- Direct bolt on replacement for your original mirrors
- Not rear carbon fiber but a carbon fiber print
- SOLD EACH
|
|
 |
GT 250R Mirrors
- Same as above in basic black
- SOLD EACH
|
|
 |
Replacement Mirrors
- For the GT250 Naked
- These look nearly identical to the older OEM ones
- Available as a Pair Only
|
$17.99
|
 |
Short Mirror GT250N -
- Shorter version of the mirrors above
- Available in pairs only
|
$17.99
|
 |
Carbon Look Mirror
- for the GT250 N
- This is a very short and small mirror
- Click on picture for more
- Sold each
|
$31.95
|
 |
K&S GT Mirrors
- Set of unique mirrors that look great on a Naked GT 250
- They feature a steel mounting post that attaches to the Polycarbonate mirror housing
- They are extremely lightweight and strong
- Includes 1 extra mounting post
|
$69.95/pair
|
 |
"CRG Style" Bar End Mirror
- Black anodized aluminum
- 3" convex mirror
- Ball joint allows them to be adjusted to nearly any position
- Includes inside bar mount or can be clamped around handlebar
- For 7/8" bars only
- Available individually or as a pair
|
|
 |
Front Sprocket
- JT or PBI (Made in the USA)
- Available in 13 - 15 teeth
- 13 teeth = better acceleration
- 14 teeth = stock
- 15 teeth = less RPM at cruising speeds.
|
|
 |
Aluminum Rear Sprocket - Sprocket Specialists
- Available in sizes 44, 46, or 48 teeth.
- You can use your stock chain with a 44-46t rear sprocket
- You will need a longer chain for 48t sprockets
- If you want a stock steel rear sprocket click HERE
|
|
 |
Chain - Budget O-Ring
- Stock length is 112 Links
- 112 L = up to 46t rear sprocket
- 114 L = up to 48t rear sprocket
- If you want the stock Hyosung chain click HERE
|
|
 |
EK SRX Chain
- Standard X-Ring (stock length is 112L)
- X-Ring Chains last 1.5 - 2 times longer than O-Ring Chains
|
|
 |
RK GXW Chain
- Premium X-Ring (Gold Color) stock length is 112L
|
|
 |
LSL rearsets
- CNC machined aluminum, includes new mounts, pegs, shift lever, brake lever, and linkages.
- You have to see these in person to appreciate their beauty!
|
$379.99
|
 |
LSL Footpeg Brackets
- Brackets available for the front or rear
- You must purchase the brackets in order to mount the LSL Footpegs
- Footpegs sold seperately, see below
|
|

|
LSL "Slash Cut" Footpegs
- Available in multiple colors
- (Sold in Pairs)
- You must have the LSL Brackets (above) in order to mount these footpegs
|
|
 |
LSL "Race" Footpegs
- Available in multiple colors
- (Sold in Pairs)
- You must have the LSL Brackets (above) in order to mount these footpegs
|
$39.99
|
 |
VORTEX gas cap
- All aluminum, keyless design.
- Available in Black
- Vortex has changed the look of the Gas Cap, we will try to have pictures soon
|
$129.95
|
 |
NGK Racing Spark Plug Wire
- High performance Silicone outer shell for maximum heat resistance with 5k ohm ceramic resistor
- Plus, they just look cool in red!
- Measures 24" overall length. Can be cut to length
- Sold in a set of two (2)
|
$47.99 / set
|
 |
Factory Centerstand
- Once you have one you'll wonder how you lived without it
- Will work on all years of the GT 250 and GT 250R
|
$89.99
|
 |
Front Fork Stand
- Lifts the front end of the ground for easy tire changes or brake jobs.
- Will work on most bikes.
- Must be used in conjunction with a rear stand.
- Packaged for easy shipping.
- Some assembly required.
|
$49.95
|
 |
Rear Stand - Heavy duty steel construction, with 4 wheels for extra stability
- This is a nice inexpensive rear stand that ships easily (some assembly required)
- I have used one on the race bike for two years and it has held up well to the abuse
- Comes with Spool type adapters
- (Swingarm lift attachments are required for the GT 250 and GT 250R)
|
Rear Stand $59.99
Swingarm Adapter $17.00
|